Cooling Bath
The supplier:
Hapro
The primary purpose of the cooling bath is to cool the hot product correctly after it exits the extruder. Without proper cooling, warpage, shrinkage, and internal stresses may occur during subsequent processing: haul-off, cutting, or winding. The equipment reduces the temperature to a level that is safe for the following stages and fixes the shape of the product, preventing deformation.
It is a stainless-steel trough (tank) filled with water. A profile, strand, or cable insulation passes through it, while the water removes heat.
Key Specifications
| Parameter | Value |
| Height | Automatic height adjustment, 1500 × 500 × 870–1200 mm |
| Cooling type | Water pump |
| Water pump power | 220 V / 85 W |
| Maximum water delivery head | 3 m |
| Length | 1500 mm |
| Maximum flow | 2800 L/h |
| Trough material | Stainless steel |
| Power supply | Single-phase, 220 V |
| Weight | 150 kg |
